Flash tool: Download here
Download = Flashtool ( Mediafire )
PASSWORD = electrodroid
The firmware (Make sure to use the correct firmware)
Download = E15i(X8) - ver 1.6 ( Mediafire )
PASSWORD = electrodroid
Download = E15i(X8) - ver 2.1 ( Mediafire )
PASSWORD = electrodroid
For start flashing proscess:
1. Extract flashtool in your pc.. example in C:\FLASH-TOOL
2. Install Falshtool.exe
a. ok, after install flashtool we will see file like this
3. Copy older version firmware in flashtool firmwares folder..
4. Launch X10FlashTool.exe from flashtool folder, and than go to Advanced > Bundle Creation
5. Click on dots(...).
6. Choose path firmware and click "open"
7. Section device,version,branding..
Example:
-Device:X8i(phone type)
-Version:2.1.1.A.0.6(depending on firmware version)
-Branding:1241-4091-Customized_RU_World_2(Name of firmware)
8. Wait for a while then you will got *.ftf file in firmwares folder
Install *.ftf files
1. Copy *.ftf file in firmware folder in Flashtool.
2. Click "Flash" button from flashtool then select *.ftf file firmware and click "OK"
3. Wait for awhile. When process finish, pop up will appear (don`t click on that!!!)
4.And then, follow the instructions below..
- Unplug your USB cable from PC
- Power off your phone
- Press back button and keep your finger on button
- Plug USB cable to PC
- Check if the green LED appear
- On popup message press "OK" button
- When "Found at USB/........" appear on flash tool you may release "back button", sit down, relax and wait.
If message "Start Flashing" everything`s ok.. If Not, repeat again..
6. Then unplug/plug USB cable
7. DONE
